2002 - 2019 i1wqrlinkradio.com

Build a Multi-Band Mono Delta Loop

Hits

Build a Multi-Band Mono Delta Loop

Make up a 14 MHz. delta loop using two separate lengths of 10 meter plus 10 centimeters each of No. 12 or No. 14 stranded copper wire and connect them in series with an insulator as shown at the bottom of Fig 1. The 10 cm extra wire is passed through the end hole of the insulator then looped back to the wire element to form a splice for later soldering
post 15 Nov 2019

Build a Multi-Band Mono Delta Loop




Antenna Delta Loop Links


Delta Loop antenna 3,5 - 30 MHz, HA3HI
84 m Total Wire Length (L1 + L2 + L3) - 28 m Triangle Length (L1 = L2 = L3) - 10.56 m 75ohm coaxial length

Delta Loops for HF, W5SDC
I decided to try a full wave Delta Loop. After using the loop for a couple of days with decent band conditions, I have never looked back. It's performance compared to the dipole has been very impressive

Delta Loop Lazy loop from 160 to 10 meters, DL5DBM
The loop is 3.650 Mhz. For matching the loop on the other bands I use a Toroid Balun with

Double Half Delta DHD, I4EWH
In teoria dovrebbe restituire un segnale basso ma con un buon rapporto S/N, pressappoco come una Beverage. L' antenna e' costituita da due triangoli di filo sospesi a un metro e mezzo da terra

Horizontal Loop Loading Methods, W8JI
The primary radiating area of a half wave loop is about 1/8th wavelength. We are essentially end loading a 1/8th wave long dipole when we use a 40 meter full wave loop on 80 meters