Hits
4 to 1 balun
Two ferrite cores, Jaycar LF1258 wired using Cat 5 UTP wire. The winding ratio is 6 turns to 12 turns. 50 ohm primary is 6 turns. The 200 ohm secondary is formed by adding 3 turns to either end, giving 12 turns overall
post 03 Mar 2024
Toroid & balun Links →
Balun for yagi 144mhz
Balun yagi if coax type rg59/u is long 34,5 cm
Baluns on Log Periodic Antennas
This is the electrically ideal method of bringing the feed line back to the mast from the log feed. This method keeps the coaxial line away from the balanced transmission line formed by the boom. This works with ANY log periodic and good balun, including 200-300 ohm balanced systems
Coaxial balun
I used RG58 coaxial cable since I use less than 300 W power. Better is the use of the RG142 Coaxial cable with Teflon dielectric, which handle a power of 2 KW at 144 MHz with a lower loss also
End-Fed 160-10m Long Wire
diy 9:1 a un-un unbalanced to unbalanced transformer the heart of the un-un uses a type 43 ft240-43 core and consists of a trifilar 3 wire winding arrangement around the core
209
Balun yagi if coax type rg59/u is long 34,5 cm
This is the electrically ideal method of bringing the feed line back to the mast from the log feed. This method keeps the coaxial line away from the balanced transmission line formed by the boom. This works with ANY log periodic and good balun, including 200-300 ohm balanced systems
I used RG58 coaxial cable since I use less than 300 W power. Better is the use of the RG142 Coaxial cable with Teflon dielectric, which handle a power of 2 KW at 144 MHz with a lower loss also
diy 9:1 a un-un unbalanced to unbalanced transformer the heart of the un-un uses a type 43 ft240-43 core and consists of a trifilar 3 wire winding arrangement around the core
Noise suppression with X-phase II This device similar devices are known as QRM eliminators or noise killers, makes it possible