Hits 

Adaptation transformer for antenna


To best use a long-wire antenna, the 9: 1 transformer will match the impedance of the 52 ohm coaxial cable. A coupling box will make it possible to use multiband
post 18 Mar 2024
Adaptation transformer for antenna

Toroid & balun Links

209



Balun for yagi 144mhz
Balun yagi if coax type rg59/u is long 34,5 cm

Baluns on Log Periodic Antennas
This is the electrically ideal method of bringing the feed line back to the mast from the log feed. This method keeps the coaxial line away from the balanced transmission line formed by the boom. This works with ANY log periodic and good balun, including 200-300 ohm balanced systems

Coaxial balun
I used RG58 coaxial cable since I use less than 300 W power. Better is the use of the RG142 Coaxial cable with Teflon dielectric, which handle a power of 2 KW at 144 MHz with a lower loss also

End-Fed 160-10m Long Wire
diy 9:1 a un-un unbalanced to unbalanced transformer the heart of the un-un uses a type 43 ft240-43 core and consists of a trifilar 3 wire winding arrangement around the core


Noise suppression with X-phase II

Noise suppression with X-phase II This device similar devices are known as QRM eliminators or noise killers, makes it possible

The K9AY loop antenna for 160 and 80m bands

The K9AY loop antenna for 160 and 80m bands You don't have the space to put up a 4 beverage antenna's, an ewe or a 4-square and want 'good ears' on 160 and 80m? no problems try a k9ay loop antenna

Spiderbeam 10-15-20m

Spiderbeam 10-15-20m E' una Yagi tribanda full-size leggera, fatta di tubi in vetroresina e filo