Balun 50ohm to 200ohm

Hits

Here is another practical application. As you can see in the picture, the 50 ohm that my TRX wants to see is given to the Balun and transformed to 200 ohm

post 15 May 2023

Toroid & balun Links →

209

1:1 Balun for HF wire
1:1 50 ohm balun for use on HF horizontal wire dipoles. It uses an AM radio ferrite rod, with 3x14 turns of wire. 10-14 turns should be good for 2-30MHz. 18SWG enammeled copper wire

Binocular ferrite 9:1 balun RX Transformer
There are lots of good designs for matching transformers for receiving antennas. it's cheap and easy, and very high performance

1:9 Antenna balun
I had this feeling the 1:4 balun was not presenting the greatest match to the open feed line. After I built and tried this 1:9 balun the autotune antenna tuner was able to

1:9 Antenna Long Wire con Balun 9:1
Vi occorre un antenna semplice e di sicuro funzionamento, in pochi minuti potrete costruirvi una Long Wire (filo lungo) o corto, fate voi

Antennas_manufacturers About Rtty mode Audio Recording Amplifiers Antennas Satellite Amateur Television ATV Aprs software Beacon Band Plan Ham Radio Capitals Europe DX cluster software

Italy provices

Italia-call-ham radio Italy provices Ham Radio Clubs Italy

EME Ham Radio Satellite Grid Software Ham shirts Ham radio Magazine Log Converter Software Logs Search Services Meteor scatter Microwave Mac Ham Radio Software Practice with the soldering Propagation Solar Cycle Power Supply PMR 466Mhz Packet Radio TNC

Italy provices

Radio transceiver