2002 - 2020 i1wqrlinkradio.com

Balun 4:1 with coaxial 1/2 d'onde

Hits

Balun 4:1 with coaxial 1/2 d'onde

Symmetrical side, the braids are connected together by welding. The loop has an electrical length of half a wavelength and its physical length can be calculated by multiplying the half wavelength by Vf, the coefficient of velocity of the cable
post 21 Nov 2019

Balun 4:1 with coaxial 1/2 d'onde




Toroid & balun Links


Homebrew A 4 To 1 Balun, N1HFX
With out a balun the transceiver can only feed an antenna which uses coaxial cable. The only other alternative is to buy an external tuner with a built-in balun fortunately, a 4 to 1 balun can be easily home

Het Balun project
254/5000 Especially if you are a QRP member, the loss or return of a balun is important. You always want to make a connection with the lowest possible transmission power. It is a shame if the balun converts a large part of the supplied power into heat!

Magnetic longwire baluns 1:9 ON6MU
This Magnetic Longwire Balun MLB makes it possible to efficiently use a coaxial lead-in cable with all forms of longwires

Materials for inductors ferrite, iron-powder for HF, ON9CVD
The simple 1: 1 balun is being know in a variety of constructions. A dedicated chapter seems appropriate

Open Air Choke Balun
A balun's purpose is to allow connecting a balanced, e.g., a dipole or driven element to an unbalanced line such as coax which is not balanced, thus the name, Balun