Homebrew Balun
A balun 1: 1 is used with an antenna that is symmetrical and has an impedance of approximately 50-75 ohms
post 15 May 2023
Toroid & balun Links →
1:1 current choke balunn
A 1:1 balun It offeres a almost flat swr curve from 1 to 30 MHz
1:4 Balun for 80m through 10m
Made from Amidon FT-114-43 core, 16 gauge speaker wire, and tie wraps
1:4 balun, 50 ohm unbalanced to 200 ohm balanced
Of course you can not take every ferrite core, it must already be suitable for high frequency shortwave
4:1 Voltage balun
The length of enamelled copper wire per winding for the T-200-2 powdered iron toroid core is determined by length per winder = 50mm per turn plus 200mm tails
209
A 1:1 balun It offeres a almost flat swr curve from 1 to 30 MHz
Made from Amidon FT-114-43 core, 16 gauge speaker wire, and tie wraps
Of course you can not take every ferrite core, it must already be suitable for high frequency shortwave
The length of enamelled copper wire per winding for the T-200-2 powdered iron toroid core is determined by length per winder = 50mm per turn plus 200mm tails
Antennas_manufacturers
About Rtty mode
Audio Recording
Amplifiers
Antennas Satellite
Amateur Television ATV
Aprs software
Beacon
Band Plan Ham Radio
Capitals Europe
DX cluster software
Italy provices
Italia-call-ham radio Italy provices Ham Radio Clubs Italy
EME Ham Radio Satellite
Grid Software
Ham shirts
Ham radio Magazine
Log Converter Software
Logs Search Services
Meteor scatter
Microwave
Mac Ham Radio Software
Practice with the soldering
Propagation Solar Cycle
Power Supply
PMR 466Mhz
Packet Radio TNC
PSK31 software
Prefix World
Propagation prediction
Qrp low power
QSL Printing
QRSS Amateur VLF operating
Radio old Museum
Radio portal
Surplus radio
Sstv Photo
SWL Shortwave DX Radio
Telegraph Morse code
VHF Activit
Web SDR