2002 - 2019 i1wqrlinkradio.com

Collinear antenna


Collinear antenna

This antenna design is better suited for people who don't have the expensive equipment needed for fine-tuning. Just build it to the exact specs, put it into a PVC pipe (some call it a 'radome') and it works. A copper wire 3mm wide is what I used. I also added two spacers (to prevent it from touching the radome). These spacers are placed where the intensity of the wave is

Collinear antenna

Antenna Collinear Links

6dbi Colinear Antenna for Wireless LAN
This is an short description on how to make a cheap omni antenna for 802.11 wireless LAN cards

6 Meter-2 Meter-440 Tri-Band Sleeved Collinear Antenna Project
Here is a Tri-Band 6/2/440 Collinear antenna

70cm colinear, M1KTA
materials should be 1.5m hard drawn copper wire

70cm Collinear Antenna From Coax, N1HFX
To get started, we will need 8 half wave lengths 231 millimeters of RG58/U coaxial cable

7dB Colinear antenna, SM0VPO
This project is about a cheap way of building a colinear antenna for VHF 145MHz, and having about 10dB