

A Mini Tuner for HF
Will match from 80 - 10 metres, unbalanced, modified incorporating a balun
post 22 Sep 2020

Antenna Transmatch tuner Links →

The Z Match and Its Matching
The article identifies an inherent drop-out region in the Z Match load range for certain capacitive

Tuner in LC circuit, DK7ZB
The tuner is connected to the transceiver via a coaxial cable and a SWR meter. Antenna and earth are connected directly to the tuner

Transmach 1,8 a 30 MHz eñado para las bandas de radio-aficionados
The transmach, is designed for radio-amateur bands, it is recommended, although it does not appear in the circuit, to place a 2.5 mH radio frequency shock at the output

Tuner 1,8-50
Variable capacitors and switch from R-104 BSN block. In the absence of these capacitors, it is possible to use 2 sections, from the transmission radios

T-match atu, EI9GQ
I used silver plated copper wire for L1 and L2. If you use enamelled copper wire, remove the insulation on one side of the coil
211

The article identifies an inherent drop-out region in the Z Match load range for certain capacitive

The tuner is connected to the transceiver via a coaxial cable and a SWR meter. Antenna and earth are connected directly to the tuner

The transmach, is designed for radio-amateur bands, it is recommended, although it does not appear in the circuit, to place a 2.5 mH radio frequency shock at the output

Variable capacitors and switch from R-104 BSN block. In the absence of these capacitors, it is possible to use 2 sections, from the transmission radios

I used silver plated copper wire for L1 and L2. If you use enamelled copper wire, remove the insulation on one side of the coil