Hits
432 Mhz EME
2 meter moon bounce or eme is my passion. i have worked 196 initials on 2 meter eme with 32 states, 36 countries and 146 grids confirmed
post 04 Mar 2024
EME ham radio satellite Links →
Moonbounce Station
Building equipment for various frequencies ong distance contacts, especially on vhf, uhf & shf
Moon Tracking System without PC
pstrotator supports separate antenna rotator controllers for azimuth and elevation control. it can control two separate rotor interfaces
Mike maintains a amateur satellite page
satellites are fun and easy to work. here i am on lake erie working the a0-27 satellite running just 2 watts
432 mhz low noise preamplifier for moonbounce
432 MHz Low Noise Preamplifier for Moonbounce Operation and Weak Signal Reception
Parabolique Decalee de 80cm Modifiee pour la Rx a 2.4GHz
this 50 ohm impedance antenna allows, when connected to a preamplifier and a 2.4ghz "downconverter", to receive 2.4ghz transponder amateur radio satellites like ao-40
51
Building equipment for various frequencies ong distance contacts, especially on vhf, uhf & shf
pstrotator supports separate antenna rotator controllers for azimuth and elevation control. it can control two separate rotor interfaces
satellites are fun and easy to work. here i am on lake erie working the a0-27 satellite running just 2 watts
432 MHz Low Noise Preamplifier for Moonbounce Operation and Weak Signal Reception
this 50 ohm impedance antenna allows, when connected to a preamplifier and a 2.4ghz "downconverter", to receive 2.4ghz transponder amateur radio satellites like ao-40
Take off angle of horizontal antenna For horizontal polarization, the electric field will move sideways on a horizontal plane, while for vertical polarization it will oscillate up and down on a vertical plane
Build a Three-Way Antenna Switch and Displa To use a wireless relay to select one of two high current capacity power relays
Calculo da Antena Bazooka A double bazooka antenna is a combination that has a complete coaxial wave multiplied by its velocity factor and a total end-to-end length of 1/4 wave for each side affected by another driver shortening factor