Hits 

Amateur radio moonbounce on 1296 mhz


The moon an reflector reflecting only about 7% of the signal that hits it, the moon is capable of reflecting enough of a VHF or UHF signal back to earth to allow communication
post 06 Mar 2024
Amateur radio moonbounce on 1296 mhz

EME ham radio satellite Links

51



Amateur Radio Homebrew For Eme
About amplifiers the mechanical description is very good and it is no problem to follow it. The housing and the special parts, which have to be made with a turning lathe, must be made by an experthe mechanical description is very good and it is no problem to follow it. The housing and the special parts, which have to be made with a turning lathe, must be made by an expert

432 Mhz EME
2 meter moon bounce or eme is my passion. i have worked 196 initials on 2 meter eme with 32 states, 36 countries and 146 grids confirmed

432 MHZ EME
the 4.9m dish has being used which is equivalent in gain to four yagis current feed is a two element quad in horizontal polarity

4-way Splitter EME
Power splitter/combiner 4-way for eme


Take off angle of horizontal antenna

Take off angle of horizontal antenna For horizontal polarization, the electric field will move sideways on a horizontal plane, while for vertical polarization it will oscillate up and down on a vertical plane

A remote antenna switch

A remote antenna switch An abiding dislike for bundles of cables running on the exterior of my house, so a remote antenna switch seemed like a good idea

5 element yagi antenna for 28.5 Mhz

5 element yagi antenna for 28.5 Mhz Gamma match will be made with a 1/2 "aluminum tube and a 75 cm coaxial piece of RG8 without sock and sheath inside the tube