Solar Cell Battery Chargers

Created: "July 5, 2004"
Updated: "Nov 21, 2009"

These Circuits will allow for Voltage Regulation and Isolation when Charging
Lead Acid Batteries with a Solar Cell.

I also suggest you read my Amplified Zener Article,
For MORE DETAILS.

   Click Here for my "Amplified Zener Article"

The "RX" Resistor "that is used on the Amplified Zener" is Not Needed for this Solar-Charger. Solar Panals are basically a current limited device. Therefore the output voltage will pull down accordingly, as the load increases.

"Back to My HOME Page"



"Here is the Schematic"
Possibly good for up to 5 Amps.


"Here is a Schematic for More Current."
Good for Higher currents and can be Expanded with More Transistors.


All Imformation in this Article is "Copyright protected".

Chemelec

*Copyright © 2004 & 2009*