Hits
Vertical Loop for 80-6 Meter
I wanted an easy to install loop for my portable island operation
Antenna Delta Loop Links →
Build a Multi-Band Mono Delta Loop
Make up a 14 MHz. delta loop using two separate lengths of 10 meter plus 10 centimeters each of No. 12 or No. 14 stranded copper wire and connect them in series with an insulator as shown at the bottom of Fig 1. The 10 cm extra wire is passed through the end hole of the insulator then looped back to the wire element to form a splice for later soldering
Two cell antenna delta for 40 meters
Delta with dimensions for a range of 40 meters. The size of the delta can be calculated by the formula L = 304 / F: L - perimeter of the delta, F - frequency at which it is set
57
Make up a 14 MHz. delta loop using two separate lengths of 10 meter plus 10 centimeters each of No. 12 or No. 14 stranded copper wire and connect them in series with an insulator as shown at the bottom of Fig 1. The 10 cm extra wire is passed through the end hole of the insulator then looped back to the wire element to form a splice for later soldering
Two cell antenna delta for 40 meters
Delta with dimensions for a range of 40 meters. The size of the delta can be calculated by the formula L = 304 / F: L - perimeter of the delta, F - frequency at which it is set
Noise suppression with X-phase II This device similar devices are known as QRM eliminators or noise killers, makes it possible