27m Titanex vertical

The antenna tuning unit used with this 27m Titanex vertical was originally designed to operate on 40, 80 and 160m
post 28 Jan 2024
27m Titanex vertical

Antenna Vertical Links


Full 1/4 wave vertical for 40m
To construct the antenna, I used 6 tubes of each 2m length. Starting at 10mm diameter for the top and ending with 36 mm at the foot

GAP Titan DX Evaluation
The GAP Titan DX It is appx. 25 feet high, and split in the middle with an insulator, allows to operate with acceptable SWR on every band from 80 through 10 meters, including WARC bands

Ground plane direttiva su sei direzioni
Questa e' una antenna adatta per HF se si dispone di un terreno od un cortile in cui piantare tre aste verticali di 1/4 di lunghezza

Noise suppression with X-phase II

Noise suppression with X-phase II This device similar devices are known as QRM eliminators or noise killers, makes it possible

The K9AY loop antenna for 160 and 80m bands

The K9AY loop antenna for 160 and 80m bands You don't have the space to put up a 4 beverage antenna's, an ewe or a 4-square and want 'good ears' on 160 and 80m? no problems try a k9ay loop antenna

Spiderbeam 10-15-20m

Spiderbeam 10-15-20m E' una Yagi tribanda full-size leggera, fatta di tubi in vetroresina e filo