Build the kuhne mku 13g2b kit. the kuhne transverter covers 1296-1298 mhz and the if is at 144-146 mhz
post 06 Apr 2022
Transverter HF VHF Links →
144MHz to 50MHz receive converter
add a receive converter for that band, and feed the signal into the 6m section of the radio
222 MHz Transverter for the FT-817
the transverter can be configured to work with the flex-1500 sdr and other transceivers with transverter ports. the boards can also be modified for 144 or 432 mhz
1296 MHz Transverter
the if frequency is 146 mhz. a 575 mhz half lo is generated by a silicon labs si530 chip
2304 MHz Transverter
i built an if attenuator to drop the 144 mhz if level from 250 mw down to 1 mw to feed the mixer
31
add a receive converter for that band, and feed the signal into the 6m section of the radio
the transverter can be configured to work with the flex-1500 sdr and other transceivers with transverter ports. the boards can also be modified for 144 or 432 mhz
the if frequency is 146 mhz. a 575 mhz half lo is generated by a silicon labs si530 chip
i built an if attenuator to drop the 144 mhz if level from 250 mw down to 1 mw to feed the mixer
Antennas_manufacturers
About Rtty mode
Audio Recording
Amplifiers
Antennas Satellite
Amateur Television ATV
Aprs software
Beacon
Band Plan Ham Radio
Capitals Europe
DX cluster software
Italy provices
Italia-call-ham radio Italy provices Ham Radio Clubs Italy
EME Ham Radio Satellite
Grid Software
Ham shirts
Ham radio Magazine
Log Converter Software
Logs Search Services
Meteor scatter
Microwave
Mac Ham Radio Software
Practice with the soldering
Propagation Solar Cycle
Power Supply
PMR 466Mhz
Packet Radio TNC
PSK31 software
Prefix World
Propagation prediction
Qrp low power
QSL Printing
QRSS Amateur VLF operating
Radio old Museum
Radio portal
Surplus radio
Sstv Photo
SWL Shortwave DX Radio
Telegraph Morse code
VHF Activit
Web SDR