Hits
Balun using Transmission Lines
This is a balun 1:1 using exclusively transmission lines in this case Coaxial Cable
post 30 Oct 2024
Toroid & balun Links →
1:1 current choke balunn
A 1:1 balun It offeres a almost flat swr curve from 1 to 30 MHz
1:4 Balun for 80m through 10m
Made from Amidon FT-114-43 core, 16 gauge speaker wire, and tie wraps
1:4 balun, 50 ohm unbalanced to 200 ohm balanced
Of course you can not take every ferrite core, it must already be suitable for high frequency shortwave
4:1 Voltage balun
The length of enamelled copper wire per winding for the T-200-2 powdered iron toroid core is determined by length per winder = 50mm per turn plus 200mm tails
199
A 1:1 balun It offeres a almost flat swr curve from 1 to 30 MHz
Made from Amidon FT-114-43 core, 16 gauge speaker wire, and tie wraps
Of course you can not take every ferrite core, it must already be suitable for high frequency shortwave
The length of enamelled copper wire per winding for the T-200-2 powdered iron toroid core is determined by length per winder = 50mm per turn plus 200mm tails
Ferrite Shop Ferrite-shop on-line shop, cable clamps,toroids, cable cores, technic,ferrite material choice
Amateur radio kits by Kanga US
Pcs Electronics RF power amplifiers-pallets archives-ABC of FM AM DAB+ DRM radio transmitters