Hits 

Antenna Moxon for 430mhz


Antenna Moxon for 430 MHz
post 04 Feb 2024
Antenna Moxon for 430mhz

Antenna 6 meter Links

103



6m 50Mhz Long wire antenna
From the transmitter or transceiver, you go to an antenna tuner via coaxial cable. The tuner is placed at the base of the antenna, not at your operating position

6m beam antennas
This type of antenna is a rather handsome one, so you can use it for portable operation

A Hairpin match for the 5 ele Tonna for 50 MHz
By changing the impedance of the driven element to 200 Ohms, it is possible to use a 1:4 halfwave balun to match the antenna properly and to make sure that the symmetry is also properly taken care of

A portable three element 6M yagi
settled for 12.5mm round hollow tubing in 2M lengths, for the main elements, with the next smaller size 10mm


Dipole 80/40 and 20/10 meters with tuner

Dipole 80/40 and 20/10 meters with tuner The wire used is an enamelled copper wire with a diameter of 1.9 mm and a length of 3 meters, often used in transformers

A remote antenna switch

A remote antenna switch An abiding dislike for bundles of cables running on the exterior of my house, so a remote antenna switch seemed like a good idea

Quad Stacked Omni 2.4/5 GHz Antenna

Quad Stacked Omni 2.4/5 GHz Antenna Compact Omni head design dual Band Frequency beamwidth: 360° Horizontal, 15° Vertical quad Stack improves gain to 12dBi