Hits
Build An Offset Attenuator
div>An RF attenuator is a device that goes between antenna and receiver to reduce the signal strength down to within the range that the receiver S-meter can handle
post 22 Apr 2024
RF attenuator Links →
Homebrewing attenuators
switched attenuator to reduce the RF level received within the range of the radio S meter to enable peaking of the incoming signal
Simple adjustable passive attenuator
This adjustable passive attenuator works as a waveguide beyond cutoff, it can be constructed in about ten minutes from parts available locally
Step attenuator kit
The kit is a classic attenuator with six sections, each section containing a Pi-circuit of selected resistors and a switchon
15
switched attenuator to reduce the RF level received within the range of the radio S meter to enable peaking of the incoming signal
This adjustable passive attenuator works as a waveguide beyond cutoff, it can be constructed in about ten minutes from parts available locally
The kit is a classic attenuator with six sections, each section containing a Pi-circuit of selected resistors and a switchon
PSION Greyline Clock PSION Greyline Clock v. 1.0 is a UTC/Local clock showing sunlight/darkness area on the world map
Radioassistance Radioassistance E Kenwood Dealer, vendita ricetrasmittenti, antenne, parti di ricambio, elettronica
SunCalc SunCalc - sunrise, sunset, shadow length, solar eclipse, sun position, sun phase, sun height, sun calculator, sun movement, map, sunlight phases, elevation, Photovoltaic