Triband VHF-Yagi for 6 m, 4 m and 2 m

Triband VHF-Yagi for 6 m, 4 m and 2 m
    Developed with the software eznec +5 and has only one feeding point of 50 ohm and a boomlength of 1,25 m
Hits 
post 14 Jun 2026



Antenna for UHF VHF Links →

154



3 Stacked Yagi Antennas
    The use of three antennas often represents a good compromise between increased antenna gain, mechanical feasibility, and satisfactory handleability


432Mhz Quagi
    This Quagi is optimized for 432.2Mhz operation, however it works well in a quite wide range of frequency


5 Element-Yagi fur 145 MHz
    Boom Length 1705 mm, Elements diameter 8-10 mm, hollow material they are obstructed by the boom, adjustment stub range length from the central arm to the collection clamp 175-200 mm diameter of aluminum tube from 6 mm distance between stub and radiator 15 mm


10 Element for 432 MHz Winkler Antennen
    The elements have direct connection to the supporting boom by a metal ring where on either side one half of the element is screwed


70cm 10-element uhf yagi
    Adjust lenght of the dipole if needed important, you can also use a folded dipole with a 1:4 balun



All Spectrum Electronic

All Spectrum Electronic All Spectrum Electronics Hobby Kits and Electronics Supply

dxengineering Ham Radio Equipment

Dxengineering Ham Radio Equipment DX Engineering Ham Radio Equipment & Supplies

BA-Electronics

BA-Electronics Ba-electronics, a division of products, has added electronic components, test equipment, wire, and supplies to its product offering