

VHF Dipoles and Yagi Antennas

Dipole antenna and Yagi 3 elements wide band, entirely made of aluminum Dipole and hot dipped steel Yagi , with PTFE or PVC insulator and stainless steel screws.They are light but very robust and resistant, usable in any weather conditions. All metal parts are electrically grounded
post 16 Dec 2024
Antenna for UHF VHF Links →
VHF/UHF Dualband vertical
I used for this antenna aluminum tubing of 10mm diameter
VHF/UHF/HF X-Beam Antenna
A forward to back ratio of 20dB. The handbook also states that this design should perform as well as or better than a similar yagi
VHF 5/8wave vertical antennas
The 1/4 wavelength monopole and the 5/8 wavelength monopole antennas are widely used. The VHF 5/8-wavelength 144 Mhz
WHEEL Antennas
The Wheel antenna has been around since the early 1950's, first used in the Amateur Radio Two Meter band as a horizontally polarized omni radiator
6 element UHF Yagi antenna
This is a standard 6 elements design scaled for UHF application
153
I used for this antenna aluminum tubing of 10mm diameter
A forward to back ratio of 20dB. The handbook also states that this design should perform as well as or better than a similar yagi
The 1/4 wavelength monopole and the 5/8 wavelength monopole antennas are widely used. The VHF 5/8-wavelength 144 Mhz
The Wheel antenna has been around since the early 1950's, first used in the Amateur Radio Two Meter band as a horizontally polarized omni radiator
This is a standard 6 elements design scaled for UHF application