Hits
diy a helical antenna for 432-435
diy a 14-turn home-made helical antenna for 432/435mhz
post 22 Mar 2024
Antenna for UHF VHF Links →
900 MHz Helical Antenna
I decided to build a pair of helical antennas, one for each circular sense. Helical antennas have broad bandwidth
A 3 element beam Band six meter
Spacing between elements is 34 and 1/2 inches. The elements are 1/2 inch aluminum tubing of 1/16-inch wall thickness
A 144 MHz Pocket antenna
A dipole fed in his center by a coaxial line. This layout is simple and efficient although the adaptation is not perfect, 50 ohms
Folded dipol for 2 m. and 70 cm
153
I decided to build a pair of helical antennas, one for each circular sense. Helical antennas have broad bandwidth
Spacing between elements is 34 and 1/2 inches. The elements are 1/2 inch aluminum tubing of 1/16-inch wall thickness
A dipole fed in his center by a coaxial line. This layout is simple and efficient although the adaptation is not perfect, 50 ohms
Linear loaded short dipole 21Mhz For my amateur radio activities on the HF bands I only have a 3.6 m wide balcony available for antennas. After some study I decided to experiment with a shortened dipole for the 15 m band
Rx antennas 4Square Rx Vertical Array My frequency design of 1.825 MHz a 90 degrees line would be 33,70 metersinstead of the previously calculated 33,27 m
Atu balanced feeder antenna system An ATU has the advantage of bringing the feeder-antenna system to resonance, act as a band pass filter both on receive and transmit and a low SWR