Hits
Antenna gp 3,5 MHz a carico lineare
Questa antenna verticale per gli 80 metri a carico lineare, di 1/2 onda e' nata dal bisogno di avere un'antenna con un buon angolo di irradiazione
post 22 Mar 2024
Antenna 80 meter Links →
Verticale per 80m
La struttura portante è realizzata con tubi in fibra di vetro ma la radiazione proviene da un filo fissato al tubo
Vertical resonant around 3.5 MHz
The combination of wire is resonant around 3.5 MHz. With a 30 uH inductor, the resonance becomes about 1.83 MHz. A series 68-ohm resistor and 16 25 foot radials brings the feed point impedance
Verticale ad un quarto d'onda accorciata
la costruzione di una verticale monobanda, facile da realizzare, per la gamma dei 75/80 m
Shunt-Feeding a Short Tower on 80 and 160m
The shunt design has been through several iterations at my QTH. First was a single wire that was matched for 80m using an omega match
81
La struttura portante è realizzata con tubi in fibra di vetro ma la radiazione proviene da un filo fissato al tubo
The combination of wire is resonant around 3.5 MHz. With a 30 uH inductor, the resonance becomes about 1.83 MHz. A series 68-ohm resistor and 16 25 foot radials brings the feed point impedance
la costruzione di una verticale monobanda, facile da realizzare, per la gamma dei 75/80 m
The shunt design has been through several iterations at my QTH. First was a single wire that was matched for 80m using an omega match
Noise suppression with X-phase II This device similar devices are known as QRM eliminators or noise killers, makes it possible
The K9AY loop antenna for 160 and 80m bands You don't have the space to put up a 4 beverage antenna's, an ewe or a 4-square and want 'good ears' on 160 and 80m? no problems try a k9ay loop antenna
Spiderbeam 10-15-20m E' una Yagi tribanda full-size leggera, fatta di tubi in vetroresina e filo