![](../copia_image/vote.jpg)
![](img/img.jpg)
J-pole 145 mhz vhf antenna
Cut the 20mm pipe in two part: 150cm and 50cm; in the same way cut the 16mm pipe: 60cm and 20cm; join the pipes at the following way
post 29 Jan 2024
![J-pole 145 mhz vhf antenna](images/j-pole-145-mhz-vhf-antenna.jpg)
Antenna jpole Links →
J-pole 144
L'antenna cosi' realizzata risuona a circa 145 Mhz con un ROS di 1-1.1 e una larghezza di banda (ROS 1,5) di circa 8 MHz
J-Pole Antenna Plans
The J-Pole antenna is fundamentally an end-fed 1/2-wavelength antenna that uses a 1/4-wavelength long transformer section to supply the very high feed voltage
J-Pole Antenna
The connection point of the coax on the twinlead was found experimentally
J-Pole Antennas for 2 Meters
Two types of 2 meter J-Pole antennas, one made of copper pipe and a roll-up J-pole made of TV twin lead
81
L'antenna cosi' realizzata risuona a circa 145 Mhz con un ROS di 1-1.1 e una larghezza di banda (ROS 1,5) di circa 8 MHz
The J-Pole antenna is fundamentally an end-fed 1/2-wavelength antenna that uses a 1/4-wavelength long transformer section to supply the very high feed voltage
The connection point of the coax on the twinlead was found experimentally
Two types of 2 meter J-Pole antennas, one made of copper pipe and a roll-up J-pole made of TV twin lead
![Antenna switch arduino for icom IC-7300](/../antype/ch45/images/antenna-switch-arduino-for-i-com-ic-7300.jpg)
Antenna switch arduino for icom IC-7300 A solution built around an arduino nano and one of the readily available four relay switching boards