Hits
Portable Slim Jim 3/4 wave End Fed Vertical
It's a modified Slim Jim end fed aerial made out of 300-ohm ribbon feeder cable
post 29 May 2026
Antenna jpole Links →
2 meter J-Pole
Cut the tubing to the size shown for the desired band. The only section where size is not critical is the mast section. Use any size you desire for mounting purposes
2 meter Aluminum Slim Jim Antenna
The Slim Jim is generally characterized as an end-fed vertical folded dipole. As with all end fed dipoles some sort of impedance matching is necessary to keep the SWR down
3 meter Slim-Jim Antenna
The gamma match consists of a 150mm length of 10mm aluminium tubing
Project antenna for 2 meter
The gamma match consists of a 150mm length of 10mm aluminium tubing
A slim antenna for vhf band
To build it I use pieces of 450 Ohms leader line approx. 154cm, a PVC tube approx. 200cm, rope,SO-239 female connector, RG-58 about 1,5meter
76
Cut the tubing to the size shown for the desired band. The only section where size is not critical is the mast section. Use any size you desire for mounting purposes
The Slim Jim is generally characterized as an end-fed vertical folded dipole. As with all end fed dipoles some sort of impedance matching is necessary to keep the SWR down
The gamma match consists of a 150mm length of 10mm aluminium tubing
The gamma match consists of a 150mm length of 10mm aluminium tubing
To build it I use pieces of 450 Ohms leader line approx. 154cm, a PVC tube approx. 200cm, rope,SO-239 female connector, RG-58 about 1,5meter
All Spectrum Electronic All Spectrum Electronics Hobby Kits and Electronics Supply
Dxengineering Ham Radio Equipment DX Engineering Ham Radio Equipment & Supplies
BA-Electronics Ba-electronics, a division of products, has added electronic components, test equipment, wire, and supplies to its product offering