Hits
A Homebrew Yagi for 1296 MHz
As none of the versions satisfied me I could not find a fast solution and started my own design by building countless prototypes and making gain measurements in free space
post 06 Aug 2024
Antenna 23cm 1.2 GHz Links →
Short agi for 23cm
Use aluminium to construct VHF/UHF antennas. This material is also easy to drill, saw and grind
The yagi for 23cm
Built DL6WU 1982 Article Based Antenna
Transverter lineare no tune 23/70cm
Particolare per le comunicazioni di supporto alla Amateur Television nella banda dei 23 centimetri
Yagi 1296-MHz-Band
The author, a well-known EME expert in this frequency range, describes his design here and gives numerous tips for the replica
Yagis for 23cm
35 elements only on a boom of about 3m gives a gain of about 17.8 dBd. Sufficient for me between the ratio of the gain and the length of the boom,supports already built for this kind of application at I0JXX
60
Use aluminium to construct VHF/UHF antennas. This material is also easy to drill, saw and grind
Built DL6WU 1982 Article Based Antenna
Particolare per le comunicazioni di supporto alla Amateur Television nella banda dei 23 centimetri
The author, a well-known EME expert in this frequency range, describes his design here and gives numerous tips for the replica
35 elements only on a boom of about 3m gives a gain of about 17.8 dBd. Sufficient for me between the ratio of the gain and the length of the boom,supports already built for this kind of application at I0JXX
Ferrite Shop Ferrite-shop on-line shop, cable clamps,toroids, cable cores, technic,ferrite material choice
Amateur radio kits by Kanga US
Pcs Electronics RF power amplifiers-pallets archives-ABC of FM AM DAB+ DRM radio transmitters