Hits
Icom microphone reference list
Icom Microphone reference list
Microphone Setting Links →
Microphne connections
During the past eleven years many hours have been spent drawing diagrams producing photographs, compiling these lists and cross
MH-31 installation and other portable microphones
I have described the function of an HF clipper on my website and here I go into some special features of the HF clipper for the FT-817
Microphone boom headset for the FT-897
Whilst experimenting with various microphones for use with the FT-897, I realised that a boom headset would be a useful accessory
D 104 Microphone wiring information, mods and circuits
Better Audio Response microphone Yaesu MH-59A8J
Yaesu rig and use the MH-59A8J microphone, you may have noticed that this microphone has a pronounced roll-off of low frequencies
43
During the past eleven years many hours have been spent drawing diagrams producing photographs, compiling these lists and cross
I have described the function of an HF clipper on my website and here I go into some special features of the HF clipper for the FT-817
Whilst experimenting with various microphones for use with the FT-897, I realised that a boom headset would be a useful accessory
Yaesu rig and use the MH-59A8J microphone, you may have noticed that this microphone has a pronounced roll-off of low frequencies
Linear loaded short dipole 21Mhz For my amateur radio activities on the HF bands I only have a 3.6 m wide balcony available for antennas. After some study I decided to experiment with a shortened dipole for the 15 m band
Rx antennas 4Square Rx Vertical Array My frequency design of 1.825 MHz a 90 degrees line would be 33,70 metersinstead of the previously calculated 33,27 m
Atu balanced feeder antenna system An ATU has the advantage of bringing the feeder-antenna system to resonance, act as a band pass filter both on receive and transmit and a low SWR