Hits 

144 & 432 MHz High IIP3 LNAs


144 & 432 MHz High IIP3 LNAs

When I first saw the article in Dubus 1/2002, I was very impressed with the data and quality of the construction, i managed to get hold of one of PA3BIY, Peter's PCBs, and built an LNA more or less from his description

post 03 Jun 2026


Preamplifiers Links

54



2 Meter GaAs FET Preamp
This circuit will work on 2 meters, 220 or 440 MHz. Some part values are different for the 3 bands, however general layout and construction are similar

2 meter antenna preamp
With a dualgate galiumarsenid fet CF300 with switchable amplifikation 14 and 24 dBD.Noisfaktor better then 0,9dB feedtrough attenuation better than 0,2 dB Maximum powerrating 750 W PEP on 2 meters with these relais

50 MHz preamp Gain 26dB with the BFG135
As I had good experience with building preamps for 144 and 430 MHz, I wanted to try a simple design for 50 MHz. The BFG135a is a cheap transistor and in my view rather strong

23 cm GaAs FET preamplifier
On 23cm the best way to obtain a good RX-sensitivity is to use a GaAs-FET in the front-end, since these devices show very low noise figures

28-30 MHz Homebrew Antenna pre-amplifier
I designed a simple circuit having in mind my junkbox! So there is nothing unusual on this pre amp, all components are possibly available into Homenrewer's Shack


Microsat

Microsat Ham radio shop for ulari project, aprs, aprs with radio, bluetooth, gps, gsm, ham radio interfaces, weather,accessories, cables to radio

Kits and Components

Amateur radio kits by Kanga US

Enigma Component Shop

Enigma Component Shop Cable & wire,capacitors, connectors, crystals/oscillators, filters, hardware,kits/modules,test & measurement