Yaesu ft-1000mp mark v essb modifications

Hits

Yaesu ft-1000mp mark v essb modifications

Yaesu ft-1000mp mark v essb modifications

The real intent of ESSB is to increase the fidelity of SSB communications by increasing both the receive and transmitted SSB

post 02 Feb 2025

Transceivers FT1000mp Links →

33

Connecting the Yaesu VL-1000 quadra to the FT-1000MP-MkV
reprogram the vl-1000 amplifier per yaesu's instructions, to activate 10 and 12m this reconfigures the amplifier as the international model

FT-1000D Diversity Why DX In Stereo
the first time i tried dual mode on my ft-1000, i was quite impressed with what i heard

Amateur Radio Manuals Yaesu

Ferrite-shop

Ferrite Shop Ferrite-shop on-line shop, cable clamps,toroids, cable cores, technic,ferrite material choice

Kits and Components

Amateur radio kits by Kanga US

Pcs Electronics

Pcs Electronics RF power amplifiers-pallets archives-ABC of FM AM DAB+ DRM radio transmitters

1/4 Slopers 40/15M Band The antenna that most suited this application was a 40m band sloper as the guy wire to be used was slightly longer than a 1/4 wave length at 7 MHz and the top fed sloper was the most convenient installation having the least impact

All band dipole Mk2 The All Band HF Doublet is often referred to as a random length dipole as it is generally as long as the available space within reason, but here are a couple of limitations to the ultimate dipole length

160M 1/4 Wave Vertical 160m vertical antenna project. It is 100' of Rohn 25G and a 20' aluminum stinger. The base is made out of four 6' power line insulators sandwiched between two Rohn base plates. 7/8' stainless bolts hold the assembly together. 32 radials 50' long and 30 radials 100'

DHD Double Half Delta

DHD Double Half Delta This is a dhd double half delta in theory it should return a low signal but with a good s - n ratio roughly like a beverage

Visual CW Tuning Indicator

Visual CW Tuning Indicator Many transceivers set the CW transmit off-set equal to the set's sidetone frequency. But it was left to the operator how to match incoming signals to the sidetone for one-frequency QSOs an awkward and time-consuming procedure

Antenna splitter per VHF-UHF per quattro ricevitori

Antenna splitter per VHF-UHF per quattro ricevitori Chi dispone di una sola antenna e vuole collegarvi più di un ricevitore necessità di uno splitter

trap-dipole-7-10-14-18-50-mhz

Trap Dipole 7, 10, 14, 18, 50 MHz Trap dipole 7-10-14-18-50mhz with balun coax cable

Diy Arduino CW keyer

Diy Arduino CW keyer I added code to read push-buttons on digital pins to trigger hard-coded messages like CQ and CQ SOTA