Hits
What tuners do
The primary function of a tuner is to present the radio with its specified load impedance
post 05 Dec 2024
Antenna Transmatch tuner Links →
Levy antenna covering with 14 to 28 MHz
One of my best Levy antenna boxes covering from 14 to 28 MHz with a single self and without switching. Very nice to use
Matching 50 ohm to 75 ohm
Most signal generators have an output impedance of 50Ω. To align an FM tuner or measure its performance, it's best to match this to the tuner's 75Ω input impedance
Modifications to the Single Coil Z Match for 1.8 MHz
The original Z Match circuit modified to include 1.8 MHz. The addition of three fixed capacitors and a 4 position switch gives the whole load resistance range at 1.8MHz
186
One of my best Levy antenna boxes covering from 14 to 28 MHz with a single self and without switching. Very nice to use
Most signal generators have an output impedance of 50Ω. To align an FM tuner or measure its performance, it's best to match this to the tuner's 75Ω input impedance
The original Z Match circuit modified to include 1.8 MHz. The addition of three fixed capacitors and a 4 position switch gives the whole load resistance range at 1.8MHz
Ferrite Shop Ferrite-shop on-line shop, cable clamps,toroids, cable cores, technic,ferrite material choice
Amateur radio kits by Kanga US
Pcs Electronics RF power amplifiers-pallets archives-ABC of FM AM DAB+ DRM radio transmitters