

Tentec 1208cy 10-50 mhz transverter
a transverter from a shortwave band to 50 mhz, i found the transverter which uses 14 mhz for if. this low if makes it easy to modify to 10 mhz, where i want to use it
post 26 Mar 2024

Transverter HF VHF Links →
144MHz to 50MHz receive converter
add a receive converter for that band, and feed the signal into the 6m section of the radio
222 MHz Transverter for the FT-817
the transverter can be configured to work with the flex-1500 sdr and other transceivers with transverter ports. the boards can also be modified for 144 or 432 mhz
1296 MHz Transverter
the if frequency is 146 mhz. a 575 mhz half lo is generated by a silicon labs si530 chip
2304 MHz Transverter
i built an if attenuator to drop the 144 mhz if level from 250 mw down to 1 mw to feed the mixer
32
add a receive converter for that band, and feed the signal into the 6m section of the radio
the transverter can be configured to work with the flex-1500 sdr and other transceivers with transverter ports. the boards can also be modified for 144 or 432 mhz
the if frequency is 146 mhz. a 575 mhz half lo is generated by a silicon labs si530 chip
i built an if attenuator to drop the 144 mhz if level from 250 mw down to 1 mw to feed the mixer