Portable station for 30m

Hits

Portable station for 30m

i decided on the 30 metre kit, because 30m has less static in the summer months than 40m

post 06 Mar 2024

Portable station for 30m

Qrp low power & Kits →

35

136 kHz Pagesas is common on lf, i usually run high power on 136 khz 400 watts, but, in may 2001, 136 khz band would be suitable for low power operation i.e. operating with a tx power output of just 5 watts

5 Meter vxo tuned cwan easy-to-build and affordable cw rig that puts out about 500 milliwatts on 15 meters

14MHz SSB QRP Micro-TransceiverThe transceiver is based on the “Micro 23” rig, that I have described here. Some simplifications of that already simplified radio have been made

Attivita' QRP in portatileI have been enjoying the challenge and fun of operating outdoors at different locations

Ferrite-shop

Ferrite Shop Ferrite-shop on-line shop, cable clamps,toroids, cable cores, technic,ferrite material choice

Kits and Components

Amateur radio kits by Kanga US

Pcs Electronics

Pcs Electronics RF power amplifiers-pallets archives-ABC of FM AM DAB+ DRM radio transmitters

1/4 Slopers 40/15M Band The antenna that most suited this application was a 40m band sloper as the guy wire to be used was slightly longer than a 1/4 wave length at 7 MHz and the top fed sloper was the most convenient installation having the least impact

All band dipole Mk2 The All Band HF Doublet is often referred to as a random length dipole as it is generally as long as the available space within reason, but here are a couple of limitations to the ultimate dipole length

160M 1/4 Wave Vertical 160m vertical antenna project. It is 100' of Rohn 25G and a 20' aluminum stinger. The base is made out of four 6' power line insulators sandwiched between two Rohn base plates. 7/8' stainless bolts hold the assembly together. 32 radials 50' long and 30 radials 100'

DHD Double Half Delta

DHD Double Half Delta This is a dhd double half delta in theory it should return a low signal but with a good s - n ratio roughly like a beverage

Visual CW Tuning Indicator

Visual CW Tuning Indicator Many transceivers set the CW transmit off-set equal to the set's sidetone frequency. But it was left to the operator how to match incoming signals to the sidetone for one-frequency QSOs an awkward and time-consuming procedure

Antenna splitter per VHF-UHF per quattro ricevitori

Antenna splitter per VHF-UHF per quattro ricevitori Chi dispone di una sola antenna e vuole collegarvi più di un ricevitore necessità di uno splitter

trap-dipole-7-10-14-18-50-mhz

Trap Dipole 7, 10, 14, 18, 50 MHz Trap dipole 7-10-14-18-50mhz with balun coax cable

Diy Arduino CW keyer

Diy Arduino CW keyer I added code to read push-buttons on digital pins to trigger hard-coded messages like CQ and CQ SOTA