Hits 

Build a Multi-Band Mono Delta Loop


Make up a 14 MHz delta loop using two separate lengths of 10 meter plus 10 centimeters each of No. 12 or No. 14 stranded copper wire and connect them in series with an insulator as shown at the bottom of Fig 1. The 10 cm extra wire is passed through the end hole of the insulator then looped back to the wire element to form a splice for later soldering
post 02 Feb 2024
Build a Multi-Band Mono Delta Loop

Antenna Delta Loop Links

60



Delta Loop antenna 3.5 - 30 MHz
84 m Total Wire Length (L1 + L2 + L3) - 28 m Triangle Length (L1 = L2 = L3) - 10.56 m 75ohm coaxial length

Delta Loop Lazy loop from 160 to 10 meters
The loop is 3.650 Mhz. For matching the loop on the other bands I use a Toroid Balun with

Double Half Delta DHD
In teoria dovrebbe restituire un segnale basso ma con un buon rapporto S/N, pressappoco come una Beverage. L' antenna e' costituita da due triangoli di filo sospesi a un metro e mezzo da terra


Noise suppression with X-phase II

Noise suppression with X-phase II This device similar devices are known as QRM eliminators or noise killers, makes it possible

The K9AY loop antenna for 160 and 80m bands

The K9AY loop antenna for 160 and 80m bands You don't have the space to put up a 4 beverage antenna's, an ewe or a 4-square and want 'good ears' on 160 and 80m? no problems try a k9ay loop antenna

Microphone boom headset for the FT-897

Microphone boom headset for the FT-897 Boom length m. 5.24-fiberglass spreaders m. 2.95-loops dimensions m. 2.00 x 4.27 with 5.00 m