

Balum Magnetico antenas de hilo

Despues de muchas pruebas, en este post, quiero resolver las dudas de muchos colegas sobre el tema de alimentar nuestro ya famoso hilo invisible o CDV Spyderman Beam
post 07 Nov 2024
Toroid & balun Links →
1:1 Guanella Current BalUn
The balun is constructed from Category 5 UTP data cable and half a 180mm broadcast ferrite rod. Normally, twisted pair is about 100 ohms
1:1 HF Balun, balanced to Un-balanced
Here is the schematic of my "uthroff's Balun. I used 13 windings Windings are placed like on the schematic, 1-3-5 going ind on the top and 2-4-6 comming out of the bottom
4:1 Air core balunThe PVC pipe on hand here was 1-5/8' in diameter, so I dropped a turn or a little less just over 11 turns for each of the two wires
4:1 homebrew transformer
A 4:1 homebrew transformer. The feed-point of this type of antennas off center has an impedance of about 300 Ohms. With a 4:1 Balun transformer is possible to feed easily by using a coaxial cable of 75 Ohms 300/4=75, like RG59 or RG11
195
The balun is constructed from Category 5 UTP data cable and half a 180mm broadcast ferrite rod. Normally, twisted pair is about 100 ohms
Here is the schematic of my "uthroff's Balun. I used 13 windings Windings are placed like on the schematic, 1-3-5 going ind on the top and 2-4-6 comming out of the bottom
A 4:1 homebrew transformer. The feed-point of this type of antennas off center has an impedance of about 300 Ohms. With a 4:1 Balun transformer is possible to feed easily by using a coaxial cable of 75 Ohms 300/4=75, like RG59 or RG11

PSION Greyline Clock PSION Greyline Clock v. 1.0 is a UTC/Local clock showing sunlight/darkness area on the world map