Hits 

Constructing a 6:1 RF transformer



Constructing a 6:1 RF transformer
    The transformer used in the CHA-250B antenna using different ferrite materials
post 03 May 2025



Toroid & balun Links

195



50ohm to 200ohm
Balanced and unbalanced systems can produce common mode currents that cause equalizing currents at the interface of both systems. And exactly at this interface baluns are switched

9:1 UnUn Project
known as a Magnetic Longwire Balun, it is an impedance transformer whose purpose is to feed a high impedance long wire from a 50ohm unbalanced coaxial input. With a 9:1 turns ratio, this gives 450ohm output impedance for the long wire

A cheap easy 1:1 balun
My Baluns are working well on both my 40M resonant dipole and my G5RV antennas

A Cost Effective Current-Mode 1:4 Balun
A cost effective current-mode 1:4 balun can be constructed from two lengths of coax, two ferrite rods, some electrical tape, cable ties, a length of PVC water-pipe and some connectors


Psion ham software

PSION Greyline Clock PSION Greyline Clock v. 1.0 is a UTC/Local clock showing sunlight/darkness area on the world map

Radioassistance

Radioassistance Radioassistance E Kenwood Dealer, vendita ricetrasmittenti, antenne, parti di ricambio, elettronica

SunCalc

SunCalc SunCalc - sunrise, sunset, shadow length, solar eclipse, sun position, sun phase, sun height, sun calculator, sun movement, map, sunlight phases, elevation, Photovoltaic