

The pennant antenna fol low bands

- Remote control of the pennant's termination resistance provides optimum null depth on the principal axis
post 24 Apr 2025
Low Band Receiving Antennas Links →
40 Meter Parasitic Delta Loop Array
On 40 meters, my experience is that you need at least 20 dB of F/B ratio in order to be able to turn down European broadcasters enough to be able to hear the west coast stations, especially the west coast stations with dipoles and 100 watts
75 Meter Delta Loop Beam
It is vertically polarized, take off angle is less than 30 degrees.The half beam width is about 56 degrees.It changes directions by adding tuning stubs that can switch in and out.The antenna is tuned for 3.800 Mhz but also easy to modify
A Simple Loop Aerial for 160/80
The antenna should tune from 1.8 to about 5MHz with 50ft 16Mtrs of cable in the loop
An Easy to Install Vertical Loop for 80-6 Meters
My portable loop is 150 feet long 50 ft per side and includes a 4:1 balun
Antenna Delta loop bidirettiva
Questa e' una antenna adatta per HF realizzabile senza troppe difficolta', l'unico inconveniente e' che necessita possedere di un discreto spazio dove installarla e di almeno quattro supporti a cui agganciare i loop
44
On 40 meters, my experience is that you need at least 20 dB of F/B ratio in order to be able to turn down European broadcasters enough to be able to hear the west coast stations, especially the west coast stations with dipoles and 100 watts
It is vertically polarized, take off angle is less than 30 degrees.The half beam width is about 56 degrees.It changes directions by adding tuning stubs that can switch in and out.The antenna is tuned for 3.800 Mhz but also easy to modify
The antenna should tune from 1.8 to about 5MHz with 50ft 16Mtrs of cable in the loop
My portable loop is 150 feet long 50 ft per side and includes a 4:1 balun
Questa e' una antenna adatta per HF realizzabile senza troppe difficolta', l'unico inconveniente e' che necessita possedere di un discreto spazio dove installarla e di almeno quattro supporti a cui agganciare i loop