Hits
3 element Yagi Antenna Calculator
Simple yagi antenna consists of three elements viz. director, dipole and reflector
post 29 Jan 2024
Antenna Calculator Links →
EZNEC antenna software
EZNEC v. 6.0 programs function on Windows XP(SP3) and later Windows operating systems, 32 or 64 bit
Folded dipole antenna input impedance calculator
If you play with the numbers, and get the input impedance down to 200ohms, you'll need a 4:1 balun to feed it from 50 ohm coax
Folded Dipole Calculator
The impedance of this antenna is around 300 ohm, so you may want to use a transformer or a 1/4 long piece of 120 ohm coaxial cable to match this impedance to 50 ohm
Impedance Transformation with Quarter-Wave Lines
The input impedance of a line an odd multiple of 1/4 long is
Inductive Reactance Calculator
An online inductive reactance calculator: write frequency, inductance
161
EZNEC v. 6.0 programs function on Windows XP(SP3) and later Windows operating systems, 32 or 64 bit
If you play with the numbers, and get the input impedance down to 200ohms, you'll need a 4:1 balun to feed it from 50 ohm coax
The impedance of this antenna is around 300 ohm, so you may want to use a transformer or a 1/4 long piece of 120 ohm coaxial cable to match this impedance to 50 ohm
The input impedance of a line an odd multiple of 1/4 long is
An online inductive reactance calculator: write frequency, inductance
Linear loaded short dipole 21Mhz For my amateur radio activities on the HF bands I only have a 3.6 m wide balcony available for antennas. After some study I decided to experiment with a shortened dipole for the 15 m band
Rx antennas 4Square Rx Vertical Array My frequency design of 1.825 MHz a 90 degrees line would be 33,70 metersinstead of the previously calculated 33,27 m
A simple SWR Meter is to be used at HF An SWR meter provides information about how well matched is your antenna with the transmitter and how well power is being radiated