Hits
Homebrew 1kw wet dummy load
Two 100 ohms 100w non-inductive resistors, cost is about 15 euros, you need to test the resistor first with a swr analyzer like the nanovna to ensure the resistor are not inductive
post 14 Mar 2024
Dummy load home mad Links →
Building a dummy load
To work up to 50MHz and perhaps 144MHz
Dummy loads for an am pwm
And a separate 12 to 16 ohm load to test the pulse width modulator
Carico Fittizio Universale
Carico fittizio economico per prove radio o tarature su stadi RF
23
To work up to 50MHz and perhaps 144MHz
And a separate 12 to 16 ohm load to test the pulse width modulator
Carico fittizio economico per prove radio o tarature su stadi RF
Take off angle of horizontal antenna For horizontal polarization, the electric field will move sideways on a horizontal plane, while for vertical polarization it will oscillate up and down on a vertical plane
Rx antennas 4Square Rx Vertical Array My frequency design of 1.825 MHz a 90 degrees line would be 33,70 metersinstead of the previously calculated 33,27 m
Calculo da Antena Bazooka A double bazooka antenna is a combination that has a complete coaxial wave multiplied by its velocity factor and a total end-to-end length of 1/4 wave for each side affected by another driver shortening facto