Hits
Reversible Beverage Array
My Beverage array to help others build same kind of installation
post 24 Mar 2024
Antenna Beverage Links →
L'antenna beverage per le bande basse
Indubbiamente la Beverage rimane sempre la più classica e migliore delle antenne per la ricezione sulle bande basse
L'antenne Beverage
This antenna, used only for reception because of its very low efficiency, looks like a long-wire antenna fed at one end by a tuning box and loaded at its other end by a non-inductive resistance
Low Band Receiving Antenna Comparisons
K9AY loop antenna my observation is many people build this antenna and fiddle with the termination resistor to try for the ultimate noise
37
Indubbiamente la Beverage rimane sempre la più classica e migliore delle antenne per la ricezione sulle bande basse
This antenna, used only for reception because of its very low efficiency, looks like a long-wire antenna fed at one end by a tuning box and loaded at its other end by a non-inductive resistance
K9AY loop antenna my observation is many people build this antenna and fiddle with the termination resistor to try for the ultimate noise
Antenna switch arduino for icom IC-7300 A solution built around an arduino nano and one of the readily available four relay switching boards
50 MHz preamp Gain 26dB with the BFG135 Preamps for 144 and 430 MHz, for 50 MHz, the BFG135a is a cheap transistor and in my view rather strong. It is not easily damaged by static discharge or RF power. FG connection
30 Volt Computer Power Supply Stack A bonus was that i discovered that these did not need a standby load connected to the supply to keep them running just apply mains power and close the Start lead to ground