Hits
Modifying Conifer Antennas for Wireless Networking
Start by disassembling your Conifer antenna, remove the 2 or 4 bolts which attach the mounting bracket and the feedhorn to the dish
post 29 Oct 2024
Antenna Wifi Links →
Patch or microstrip antenna
The purpose of this article is to create a patch antenna for the 2.4 GHz microwave band used by Wi-Fi
Pillbox Antenna for 5.6 GHz Band
The pillbox or cheese antenna is made of two parallel plates which are connected to the narrow strip of parabolic cylinder reflector
Trevor MarshallBiQuad 802.11b Antenna 11dBi, wide ban
I used Printed Circuit board scraps for the 110 x 110 mm reflector, but it will be just as effective if made out of sheet brass or copper
Antenna per WLAN 802.11b tipo short back
utilizzare materiali di facile reperibilità e dal costo contenuto
107
The purpose of this article is to create a patch antenna for the 2.4 GHz microwave band used by Wi-Fi
The pillbox or cheese antenna is made of two parallel plates which are connected to the narrow strip of parabolic cylinder reflector
I used Printed Circuit board scraps for the 110 x 110 mm reflector, but it will be just as effective if made out of sheet brass or copper
utilizzare materiali di facile reperibilità e dal costo contenuto
Ferrite Shop Ferrite-shop on-line shop, cable clamps,toroids, cable cores, technic,ferrite material choice
Amateur radio kits by Kanga US
Pcs Electronics RF power amplifiers-pallets archives-ABC of FM AM DAB+ DRM radio transmitters