Hits
Long wire antenna for 11 meter
Length may also not be correlated to the desired wavelength but adapted for convenience
post 01 Feb 2024
Antenna CB 27 MHz Links →
2 or 3 elements yagi 27 mhz
Above is a simple drawing of a 3 elements yagi
3 element yagi for 11meter, I1WQR
Hairpin Matching System antenna convenient way to match the feedpoint impedance of a Yagi antenna with coaxial cable
A simple dipole antenna calculator
A simple Dipole Antenna,the Wire Size can range from 16 AWG to 12 AWG. The larger the wire, the wider the bandwidth
Gamma Match Construction
Used for a planar dipole in the yagi-uda antenna
80
Above is a simple drawing of a 3 elements yagi
Hairpin Matching System antenna convenient way to match the feedpoint impedance of a Yagi antenna with coaxial cable
A simple Dipole Antenna,the Wire Size can range from 16 AWG to 12 AWG. The larger the wire, the wider the bandwidth
Used for a planar dipole in the yagi-uda antenna
Linear loaded short dipole 21Mhz For my amateur radio activities on the HF bands I only have a 3.6 m wide balcony available for antennas. After some study I decided to experiment with a shortened dipole for the 15 m band
Rx antennas 4Square Rx Vertical Array My frequency design of 1.825 MHz a 90 degrees line would be 33,70 metersinstead of the previously calculated 33,27 m
A simple SWR Meter is to be used at HF An SWR meter provides information about how well matched is your antenna with the transmitter and how well power is being radiated