Hits
Quadrafilar Helix antenna for 436 Mhz
This is an antenna that I just built. I intend on using for receiving the AO-27 downlink at 436.800 +/- doppler. It is built with right hand circular polarization, and the gain is supposed to be in the neighborhood of 3 DB
post 29 Jan 2024
Helix Antennas Links →
435MHz 12 turn Helix Antenna
This 50 ohm impedance antenna, when powered with 25-100W of RF in SSB, joins the Molniya orbiting satellites as AO-40 and AO-10
A Helix antenna for 2 metre satellite
The main boom is 25 mm. sq. galvanized steel tube with a 1.6 mm. wall thickness, and 5m. long. This is for a 10 turn helix, and allowing approx 400mm
A Home made Helical antenna for a GPS
In the practical construction of a half-turn quadrifilar helix it is especially important to respect the exact lengths of the helical wires
A quadrifilar helix weather satellite receiving antenna
How to make a quadrifilar helix QFH antenna easily from inexpensive materials PVC plumbing pipe and RG-58U co-axial
34
This 50 ohm impedance antenna, when powered with 25-100W of RF in SSB, joins the Molniya orbiting satellites as AO-40 and AO-10
The main boom is 25 mm. sq. galvanized steel tube with a 1.6 mm. wall thickness, and 5m. long. This is for a 10 turn helix, and allowing approx 400mm
In the practical construction of a half-turn quadrifilar helix it is especially important to respect the exact lengths of the helical wires
How to make a quadrifilar helix QFH antenna easily from inexpensive materials PVC plumbing pipe and RG-58U co-axial
Antenna switch arduino for icom IC-7300 A solution built around an arduino nano and one of the readily available four relay switching boards
Satellite Antenna Rotator Controller and TRACker ARCTRAC is a portable integrated satellite tracking system
Duplexer 2m-70cm- Usare un'antenna bibanda 2/70 con due radio separate V/UHF, usare due antenne separate V/UHF con una singola radio bibanda