Hits
Stick Antenna for 2 Meters
An aluminium version of the Vertical Bazooka design which was made from coax
post 28 Feb 2024
Antenna Bazzoka Links →
2mt and 70cm Bazooka Dipoles
This antenna is very easy to make from a piece of 50 ohm or 75 ohm coaxial cable
10m Bazooka, WD9N
The construction of the bazooka antenna is built with RG-6, has a ratio of 1.5: 1 SWR or less over the whole band
40m Coaxial Dipole Antenna aka Double Bazooka, M0EZP
This was a real surprise for 40m, the band for which it was designed.
1/4 Vertical bazooka antenna for the 40m , ON8IM
Omnidirectional antenna for the 40m, the angle of the radials will be idealy between 35 and 45
35
This antenna is very easy to make from a piece of 50 ohm or 75 ohm coaxial cable
The construction of the bazooka antenna is built with RG-6, has a ratio of 1.5: 1 SWR or less over the whole band
This was a real surprise for 40m, the band for which it was designed.
Omnidirectional antenna for the 40m, the angle of the radials will be idealy between 35 and 45
PIC-Keyer This project describes the construction of a real "QRP" keyer with a small microcontroller PIC 16F84, with slightly modified hardware also PIC16F62