Hits
My 136 kHz Station
The antenna requires 4mH at 137 kHz to tune it and I have built a loading coil with a variometer using two polystyrene plastic
post 14 Apr 2026
Antenna 136KHz Links →
A Ten Gallon Loading Coil - Variometer for MF/LF
Just about anything I plan to use as an antenna will require a serious loading coil. I decided to construct an experimental
Antenna in ferrite perOL 10-500 KHz
E' possibile costruire un'antenna in ferrite per LF ottenendo buone prestazioni con una spesa assolutamente irrisoria
Antenna Marconi 136 khz
The qso made in cross mode at the same QRG because my set-up has not the capability to TX audio, but only CW QRSS and Opera
Antenna Insulators for LF-MF
Calculations indicated that there was close to 35,000 volts present on the antenna during high power operation
70
Just about anything I plan to use as an antenna will require a serious loading coil. I decided to construct an experimental
E' possibile costruire un'antenna in ferrite per LF ottenendo buone prestazioni con una spesa assolutamente irrisoria
The qso made in cross mode at the same QRG because my set-up has not the capability to TX audio, but only CW QRSS and Opera
Calculations indicated that there was close to 35,000 volts present on the antenna during high power operation
Microsat Ham radio shop for ulari project, aprs, aprs with radio, bluetooth, gps, gsm, ham radio interfaces, weather,accessories, cables to radio
Amateur radio kits by Kanga US
Enigma Component Shop Cable & wire,capacitors, connectors, crystals/oscillators, filters, hardware,kits/modules,test & measurement