this paper is about fixing the ic-7000 noisy audio that occurs only when the audio output is connected to high-fidelity earphones
post 24 Dec 2021
Transceivers ic-7000 Links →
ICOM IC-7000 audio noise
this paper is about fixing the ic-7000 noisy audio that occurs only when the audio output is connected to high-fidelity earphones
ICOM IC-7000 Low Power Output
the ic-7000 needs 13.8 volts; anything less will affect power output
ICOM IC-7000 Shift Registers
Before this mod after been turned on for an hour or so the temp meter on the radio would show around 50% on the scale 7 or 8 bars, after the mod the temp meter shows around 25% on the scale 4 bars
IC-7000 pictures
pictures from icom ic-7000. description
25
this paper is about fixing the ic-7000 noisy audio that occurs only when the audio output is connected to high-fidelity earphones
the ic-7000 needs 13.8 volts; anything less will affect power output
Before this mod after been turned on for an hour or so the temp meter on the radio would show around 50% on the scale 7 or 8 bars, after the mod the temp meter shows around 25% on the scale 4 bars
pictures from icom ic-7000. description
Antennas_manufacturers
About Rtty mode
Audio Recording
Amplifiers
Antennas Satellite
Amateur Television ATV
Aprs software
Beacon
Band Plan Ham Radio
Capitals Europe
DX cluster software
Italy provices
Italia-call-ham radio Italy provices Ham Radio Clubs Italy
EME Ham Radio Satellite
Grid Software
Ham shirts
Ham radio Magazine
Log Converter Software
Logs Search Services
Meteor scatter
Microwave
Mac Ham Radio Software
Practice with the soldering
Propagation Solar Cycle
Power Supply
PMR 466Mhz
Packet Radio TNC
PSK31 software
Prefix World
Propagation prediction
Qrp low power
QSL Printing
QRSS Amateur VLF operating
Radio old Museum
Radio portal
Surplus radio
Sstv Photo
SWL Shortwave DX Radio
Telegraph Morse code
VHF Activit
Web SDR