Hits
Icom IC-706 and SGC-23
the scg smartuner family is build to operate stand-alone. you only need to provide 12 vdc power to the coupler and when it sees rf input it starts matching your antenna to the feed line
post 07 Jul 2024
Radio Transceivers IC706 Links →
PTT line interface for ICOM IC-706 family
goal was to develop a solid state PTT interface circuit
Simple CAT programming interface for ICOM RIGs
this simple and cost effective interface circuit is designed for use with any icom amateur radio equipment with civ interface
TR-LOG to ICOM Control cable
the ic-706 vox mode is selectable in 100ms time increments, from "0" to 1 second. the 100ms position is too slow for contest operation
Yet Another ICOM CI-V Interface
this page describes my home-built icom ci-v interface
22
goal was to develop a solid state PTT interface circuit
this simple and cost effective interface circuit is designed for use with any icom amateur radio equipment with civ interface
the ic-706 vox mode is selectable in 100ms time increments, from "0" to 1 second. the 100ms position is too slow for contest operation
this page describes my home-built icom ci-v interface
Ferrite Shop Ferrite-shop on-line shop, cable clamps,toroids, cable cores, technic,ferrite material choice
Amateur radio kits by Kanga US
50MHz to 28MHz RX Converter The concept of the rx converter is quite simple and nothing really new. the local oscillator is a standard colpitts crystal oscillator producing the 22mhz lo signal