Hits

I built a ZM-2 QRP Antenna
- The Emtech ZM-2 Antenna Tuner is a nifty little portable transmatch for QRP
post 11 Mar 2025
Antenna Transmatch tuner Links →
Transmatch automat
Working: 3.0 to 30 MHz. Input power: Over 2500 W PEP
Transmatchs varios acopladores de antenas
As a reference for these projects, variable capacitors of around 410pf, common in valve receivers, are in most cases perfectly usable for low or medium powers
Tuner W1FB scheme Compiled
Variable capacitors have a capacity of 200 pF, for a power of 2 kW at the peak, the gap between the plates should be about 2 mm. L1 - coil with slider, maximum inductance 25 mH. L2 - 3 turns of 3.3 mm bare wire on a 25mm mandrel
Tuner for HF
175
Working: 3.0 to 30 MHz. Input power: Over 2500 W PEP
As a reference for these projects, variable capacitors of around 410pf, common in valve receivers, are in most cases perfectly usable for low or medium powers
Variable capacitors have a capacity of 200 pF, for a power of 2 kW at the peak, the gap between the plates should be about 2 mm. L1 - coil with slider, maximum inductance 25 mH. L2 - 3 turns of 3.3 mm bare wire on a 25mm mandrel
eYou.com.au RF shop Test Instruments, RF Coaxial Cable, RF Coaxial Connectors, Coaxial Attenuators, Supplier in Australia, melbourne

