Hits 

End Fed 15-17-20-30-e-40


Antenna End Fed mezz'onda multibanda con accordatore manuale per le bande HF dei 5-17-20-30-e-40 metri
post 15 May 2024
End Fed 15-17-20-30-e-40

Antenna End Fed Links

63



EFHWA tuner
Un tipo un balun 1:7 oppure 1:8 per fronteggiare gli ohm presenti ai vertici della nostra antenna, quindi 3 giri di avvolgimento primario e 21 o 22 di secondario andranno bene. per quanto riguarda il ROS non salgo mai sopra 1.6-1.8

Endfed per 17-20-30-40 metri
Una veloce multibanda E.F.W.H.A. dedicata ai piccoli quadri banda come il mio FT857D

End fed 1/2 wave matching system end feed
End-fed antennas are increasingly popular again, at least partly because of compact iron toroid cores. Small soft-iron cores allow compact, easy-to-build, low-power transformers and networks

End fed antenna lambda/2
Un trasformatore 1:64 su cui e' collegato un filo lungo lambda/2 della frequenza prescelta. una versione a 3 o 5 bande in modo da avere maggiori chance su piu' frequenze. Un filo di rame teso ha un'impedenza superiore ai 3.3 K ohm e quindi per poter adattare l'impedenza ai 50 ohm della radio, con un toroide FT240-43 - 1:64

An EFHW antenna for 160-10m band
An efhw as inverted-l from the feedpoint at the edge of property, about 10m upwards into the direction roof ridge


Ferrite-shop

Ferrite Shop Ferrite-shop on-line shop, cable clamps,toroids, cable cores, technic,ferrite material choice

Kits and Components

Amateur radio kits by Kanga US

Pcs Electronics

Pcs Electronics RF power amplifiers-pallets archives-ABC of FM AM DAB+ DRM radio transmitters