Hits
Endfed multibands with tunner
End-feed antenna with 1.5mm wire 36m long and T200-2 toroid - 23 double turns of one mm
post 12 Apr 2026
Antenna End Fed Links →
Multi band end-fed
The antenna is very effective / efficient, it can be mounted as vertical, horizontal or as a sloper, it is low on QRM / QRN, it does not cause any RFI in the cabin, it is very practical to assemble
Realizzazione della EFHWA
E' un semplice L Tuner che adatta l'impedenza dai 50 ohm del RTX ai 2450 dell' End Feed Half Wave Antenna
Remote loading unit for a 160 end fed antenna
I have made three of these remote loading units, two currently in use. . The supply to the motor is via the coax feeder
The end fed wire antenna
A simple matching unit is needed to couple the wire to the rig and a counterpoise is required for some bands
An End Fed Half Wave Antenna Work
How to build half wave antennas end fed and fed with a 50 ohm coupler work without long radials, fancy grounds, inductors, etc
78
The antenna is very effective / efficient, it can be mounted as vertical, horizontal or as a sloper, it is low on QRM / QRN, it does not cause any RFI in the cabin, it is very practical to assemble
E' un semplice L Tuner che adatta l'impedenza dai 50 ohm del RTX ai 2450 dell' End Feed Half Wave Antenna
I have made three of these remote loading units, two currently in use. . The supply to the motor is via the coax feeder
A simple matching unit is needed to couple the wire to the rig and a counterpoise is required for some bands
How to build half wave antennas end fed and fed with a 50 ohm coupler work without long radials, fancy grounds, inductors, etc
Microsat Ham radio shop for ulari project, aprs, aprs with radio, bluetooth, gps, gsm, ham radio interfaces, weather,accessories, cables to radio
Amateur radio kits by Kanga US
Enigma Component Shop Cable & wire,capacitors, connectors, crystals/oscillators, filters, hardware,kits/modules,test & measurement