Hits
Windom con balun 6.1
- Un'impedenza di circa 300 ohm, occorre inserire un balun 6:1 sul punto di alimentazione
post 02 Jan 2025
Toroid & balun Links →
50ohm to 200ohm
Balanced and unbalanced systems can produce common mode currents that cause equalizing currents at the interface of both systems. And exactly at this interface baluns are switched
9:1 UnUn Project
known as a Magnetic Longwire Balun, it is an impedance transformer whose purpose is to feed a high impedance long wire from a 50ohm unbalanced coaxial input. With a 9:1 turns ratio, this gives 450ohm output impedance for the long wire
A cheap easy 1:1 balun
My Baluns are working well on both my 40M resonant dipole and my G5RV antennas
A Cost Effective Current-Mode 1:4 Balun
A cost effective current-mode 1:4 balun can be constructed from two lengths of coax, two ferrite rods, some electrical tape, cable ties, a length of PVC water-pipe and some connectors
195
Balanced and unbalanced systems can produce common mode currents that cause equalizing currents at the interface of both systems. And exactly at this interface baluns are switched
known as a Magnetic Longwire Balun, it is an impedance transformer whose purpose is to feed a high impedance long wire from a 50ohm unbalanced coaxial input. With a 9:1 turns ratio, this gives 450ohm output impedance for the long wire
My Baluns are working well on both my 40M resonant dipole and my G5RV antennas
A cost effective current-mode 1:4 balun can be constructed from two lengths of coax, two ferrite rods, some electrical tape, cable ties, a length of PVC water-pipe and some connectors
Ferrite Shop Ferrite-shop on-line shop, cable clamps,toroids, cable cores, technic,ferrite material choice
Amateur radio kits by Kanga US
Pcs Electronics RF power amplifiers-pallets archives-ABC of FM AM DAB+ DRM radio transmitters