Hits
QRP Power Meter and Dummy Load
The 50 Ohm load consist of resistors R2 through R5. The four 200 Ohm resistors in parallel combine to make 50 Ohms
post 02 May 2024
Dummy load home mad Links →
Hf-mt dummy load by vk2kvv
Useful for HF bands, can absorb a 200W modulated carrier
Homebrew 1kw wet dummy load
Two 100 ohms 100w non-inductive resistors, cost is about 15 euros, you need to test the resistor first with a swr analyzer like the nanovna to ensure the resistor are not inductive
Homebrew dummy load
The dummy load consists of eight 100 ohm resistors rated at 2 W
25
Useful for HF bands, can absorb a 200W modulated carrier
Homebrew 1kw wet dummy load
Two 100 ohms 100w non-inductive resistors, cost is about 15 euros, you need to test the resistor first with a swr analyzer like the nanovna to ensure the resistor are not inductive
The dummy load consists of eight 100 ohm resistors rated at 2 W
Ferrite Shop Ferrite-shop on-line shop, cable clamps,toroids, cable cores, technic,ferrite material choice
Amateur radio kits by Kanga US
Pcs Electronics RF power amplifiers-pallets archives-ABC of FM AM DAB+ DRM radio transmitters