Hits
FT-1000MP Automatic Band Selection Interface
I faced the problem of interfacing the new rig into my mostly automated station
post 04 Apr 2024
Transceivers FT1000mp Links →
Yaesu FT-1000MP Mark V ESSB Modifications
The real intent of ESSB is to increase the fidelity of SSB communications by increasing both the receive and transmitted SSB
Yaesu FT-1000MP Settings and Troubleshooting
new page 1checking and setting the frequency of the ft1000mp ref oscillator
Yaesu VL-1000 amplifier
the pa stage consists of four push-pull modules, each comprising a pair of motorola mrf150 mosfet devices
Yaesu MARK V / FT-1000MP HF Transceiver
ft-1000mp transceiver is squarely aimed at the high performance contest and dx crowd
34
The real intent of ESSB is to increase the fidelity of SSB communications by increasing both the receive and transmitted SSB
new page 1checking and setting the frequency of the ft1000mp ref oscillator
the pa stage consists of four push-pull modules, each comprising a pair of motorola mrf150 mosfet devices
ft-1000mp transceiver is squarely aimed at the high performance contest and dx crowd
Linear loaded short dipole 21Mhz For my amateur radio activities on the HF bands I only have a 3.6 m wide balcony available for antennas. After some study I decided to experiment with a shortened dipole for the 15 m band
Rx antennas 4Square Rx Vertical Array My frequency design of 1.825 MHz a 90 degrees line would be 33,70 metersinstead of the previously calculated 33,27 m
A simple SWR Meter is to be used at HF An SWR meter provides information about how well matched is your antenna with the transmitter and how well power is being radiated